|
A versatile set designed for re-chucking of bowls to remove chuck marks, add decoration or to re-shape the bottoms of bowls that have already been turned.
Fits Supernova, G3 and Patriot chucks. Fixings and rubber buttons supplied.
Standard Cole Jaws are suitable for lathes with minimum 12”/300mm swing diameter.
(Mini Cole Jaws are available suitable for lathes with a minimum 8”/203mm swing)
- Fast, easy way to re-chuck or reverse bowls
- Perfect for bread boards and similar projects. You can face off both sides flat.
- Fits all Teknatool Chucks including older nova chucks
- Other Jaws can be mounted
- Customisable with false wooden jaws made from MDF etc
Other jaw sets can be fitted to the Cole Jaws making a combination jaw facility – expanding dovetail facility for mounting bowls/platters and a reverse dovetail for mounting footed bowls/platters.
TIPS N TRICKS!
While traditionally these type of jaws are used in the compression mode - depending on the bowl shape, the jaws can be used to grip in either the contracting or expanding mode.
To ensure best grip, the bowl should have a positive or negative flair towards the edge of the bowl.
Try and avoid straight sided bowls where the grip will be less efficient. Best cutting technique is to have a cutting action with the chisel such that much of the force is directed towards the headstock, not across the face.
|
You must be over 18 years old to purchase any chisel or sharp blade of any kind on this website